Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Staining Parquet floors question

Featured Replies

My fiancé and I are in the process of a renovation.  We've been having issues with the test areas with the darker stains with unevenness/blotchiness.  

 

We just watched The Wood Whisperer's "Coloring/Staining Blotchy woods video"   Marc uses a  Bullseye Seal Coat Shellac along (wax free) with General Finishes gel stain on some oak.  We have oak wood parquet floors and it says that you can use the gel stain on floors.  Would idea work for us?  The contractor is ready to stain them.  What do you all think?  Thanks so much, Leo

 

Here's the youtube video btw:

 

http://youtu.be/UjwgaADLr9w

 

 

post-15122-0-84960400-1390964795_thumb.j

  • Author

Thanks.  I attached a sample stain.  Not the best photo, but something to look at.  Thanks again.

That is not blotching that is a bad sanding job. GF is a very expensive option for a floor. Go to a real finish supplier like Rodda or Sherwin williams and get the proper mop on stain.

Agree with PB on the floor sanding. Oak's don't blotch. By the way, General Finishes has a complete line of professional water-based floor stains and topcoats for wood floors. The gel stain is for hobby woodworking. 

 

http://generalfinishes.com/waterbase-floor-stains-topcoats#.UulHBz1dVA0

 

-Ace-

I always use bona oil penetrating stain for floors. Oak is a great wood to stain, we always sanded to 100, screened the floors with 100. Special care is needed for a parquet floor due to grain directions. Then we water popped the floors. Wipe the floors with a decently damp rag. Let fully dry then stain.

Sanding job for staining a floor has to be perfect.  You can't skip a grit, or get in a hurry with any step.   Final step for us is screening with the finest grit you can find in a sanding screen.  Sometimes 220 and sometimes 180 depending on what my supplier has when I go, but either does okay.  We have good luck with Bona stain.

 

We put the stain on with the buffer.  Take the backing pad for the sanding screen off, and set the brush on top of a piece of carpet.  It makes quick work out of it.  Put a little down and play with it, to learn how much you need to put out for the buffer.  Too much is worse than too little, but with Bona, there is plenty of margin for erro.

 

http://floormechanics.com/180_grit_16_inch_sanding_screens_box_of_10_screens-AAS16637502.php?gclid=CNm9sZ3eprwCFW3NOgodaDgAQw

 

http://floormechanics.com/220_grit_16_inch_sanding_screens_box_of_10_screens-AAS16637602.php

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.