Marco Divetta Posted February 25, 2014 Report Posted February 25, 2014 I have a combo machine with a horizontal / slot mortising attachment and I'm looking for a chuck. All the machines I've seen online seem to have what looks like a standard 3 jaw chuck like the one in my drill press ... Are they the same thing ?? I'm a bit hesitant in putting in the wrong chuck for obvious reasons :-/ Quote
dwacker Posted February 25, 2014 Report Posted February 25, 2014 I have a combo machine with a horizontal / slot mortising attachment and I'm looking for a chuck. All the machines I've seen online seem to have what looks like a standard 3 jaw chuck like the one in my drill press ... Are they the same thing ?? I'm a bit hesitant in putting in the wrong chuck for obvious reasons :-/ No they are not the same. They are closer to a 3 jaw lathe chuck but they are also not on a morse taper. I had the laguna for years and before that played with a using a horizontal boring machine using it as a mortiser and it failed due to the drill type chuck. 1 Quote
Marco Divetta Posted February 26, 2014 Author Report Posted February 26, 2014 No they are not the same. They are closer to a 3 jaw lathe chuck but they are also not on a morse taper. I had the laguna for years and before that played with a using a horizontal boring machine using it as a mortiser and it failed due to the drill type chuck. Thanks PB Did the bits slip in the drill type chuck ?? Because I'm thinking if I use a drill chuck the bit will either slip or the chuck will fall to pieces because it's not made for them speeds. I have a small machine chuck from a engineers bench lathe that will screw on but I have to cut away some of the showed covering the arbor to get it on and it's a bit heavier than a drill chuck so I might try that first. Quote
dwacker Posted February 26, 2014 Report Posted February 26, 2014 Drill chucks are not made for that much side load. 1 Quote
Marco Divetta Posted February 26, 2014 Author Report Posted February 26, 2014 I think I'll abandon the whole idea .... There are to many grey areas and I'm not willing to take the chance. Thanks anyway PB I appreciate the input. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.