rodger. Posted November 6, 2014 Report Posted November 6, 2014 When moving my shop stuff, one of the movers dropped my delta 50-760 single stage dust collector. The knobs broke, but otherwise it appeared fine. I have been using it for the last while. Upon cleaning it last night, I noticed that the opening for the filter bag is slightly (measured with a tape) oblong. This means that the unit is probably letting out some nasty air around the 1 micron filter bag opening. I currently have it set up with a 5" hose, and wheel it around from machine to machine. So, I thought this may be a good time to upgrade. I am already planning on buying a CT26 from Festool, so I may get a new DC as well, and sell the old one "as is". The question, as always, is which one? If I get a cyclone, it has to be Oneida. I cannot get clearvue in my area delivered at a reasonble cost. I can order the Oneida from a machine shop a few hours from home. My main concern is SPACE. I have a tiny shop, and will really need to be conscious of space. I looked up the 2HP gorillas and V-systems. These could potentially go on the wall, and therfor save a bit of space. They are still enormous compared to my Delta though. I also considered the mini gorilla, but it only pulls 600 CFM at max. I believe a planer needs 800 CFM for effective fine DC. It also has a tiny drum (17 Gallon or so). I can make it work though, if it can collect the fines. Just looking for general advice I guess. I am aware of the dangers of dust, and will not cheap out here. I am willing to pay the money for a premium collector if necessary. Any opinions or experienced oneida/other cyclone users want to chime in? Or should I go with another single stager? If single stage, it has to have a cannister with excellent filtration (better than 1 micron). Quote
Vyrolan Posted November 6, 2014 Report Posted November 6, 2014 You could do a single stage and addon an Oneida Super Dust Deputy. I believe some of the forum-goers have the SDD and have really liked it. Quote
rodger. Posted November 6, 2014 Author Report Posted November 6, 2014 I considered this, but the room it requires is too great. Plus, the cost of a new ss plus cyclone is close to a gorilla anyways. Quote
skiback46 Posted November 6, 2014 Report Posted November 6, 2014 I have the Pro1500 and love it...though recently downsized my shop and its in storage. I originally was going to go with the SDG, and after speaking with them, they convinced me I only needed the V3000. Before I purchased it I ended up changing somethings around, and had the potential to move to a higher elevation so I ended up going with the big guy. All this to say, I would call them and discuss your options with them. They are very friendly(even by Canadian standards), helpful and in my experience have not tried to upsell me. If space is an issue becareful considering a single stage and SDD, it ends up taking up a lot more space. Even the 1500 only took up 30" by 50" in one corner of my shop (just for reference Delta states the size of the 760 as 19x35). You can easily store a shopvac or other something under the filter also so the space is not a total "waste". Now I'm in a rental, with a half car garage...half used for storage, so its mostly hand tools for me till we find a new place. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.