Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

mounting my single stage DC

Featured Replies

in a previous post, I mentioned that I was shopping for a new dust collector. I found that mine had an "out of circle" opening where the filter bag is typically installed. I panicked a little, and almost bought a new cyclone.

The issue I had discovered with cyclones is that they are very large. I was looking for a wall mount option, which they all have, but they take up a load of room.

So I decided to go and look at my collector a bit more closely. I confirmed that the circle is indeed oblong, but it makes no difference. The filter bag uses a snap ring, and it conforms to the shape of the opening. Perhaps it has been oblong since I bought it. Who knows. The good news is that I don't need a new DC.

I did like the idea of wall mounting though, so I decided to wall mount my delta 50-760. I don't treat this unit as a central collector. I wheel the machines I use over to it, so it seems to be a good idea for my small shop to have it wall mounted.

To accomplish the task, I removed the stand and installed a plywood backer to the wall studs. I mounted metal shelf brackets rated for like 1000lbs or something crazy like that. Then I used some turnbuckles to "stick it" to the wall so that if I bumped into the collector, it wouldnt hit the floor. Then I bent a custom angle bracket and mounted it to the back of the collector and into the wall. I can hang on this thing and it stays put!

I mounted it higher than the stand held it, and to be honest I saved only a small amount of space. This feels like a big difference though, because it's one less stand on the floor. The collector is also higher, so I can move things around it easier.

Overall, it's a good change for my little shop. Took about 2 hours and a quick trip to the hw store.

post-6372-0-91362300-1415560661_thumb.jp

post-6372-0-14024200-1415560698_thumb.jp

post-6372-0-61212400-1415560726_thumb.jp

I wonder if this is what the installers are going to do with my two JET DC with 0.5 micron Filters. They said that they needed both of them to get the CFM that all the machines required. I am never going to plane and joint  or use any two machines at the same time. 

Looks solid. Next time you get a chance, get some rubber washers and a piece of foam for the wall. Help keeps it from vibrating itself to death. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.