Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Makita Miter Saw Blade Movement

Featured Replies

I've notice lately that I'm not getting clean cuts using my miter saw. It's hard to describe but it looks like a cut you might get if you saw part way through the board - lift the blade and then drop the blade to finish the cut. There is a circlular mark left on the cut portion of the board. I always use the miter saw clamp to avoid wood movement.

 

Ok, with that said -  I noticed that when I grab the blade it has some side to side movement. Approximately 1/16th of an inch of movement. I checked to make sure the blade was tight and it is. As this is the only miter saw I've ever owned I have nothing to compare it with. It doesn't seem normal that the saw blade should move side to side at all.

 

I will add that this saw is about 6 years old and I've used the crap out of it. Do you think it's just worn out and needs replaced?

 

Thanks for any help or suggestions.

Is it a fresh sharp blade?

 

Does the slop you're feeling feel like it's coming from the bearing?

  • Author

Thank you for replying.

 

The blade is a sharp Forrest blade. That was my thinking - bearing is wearing out. Not hearing any weird noise at start up or shut down.

Well, as I don't know much about the Makita chop saw, best to let someone who owns one to chime in..

Slop in the bearings and loose pivot joint can both cause that sort of marks. I've got an old huge Makita miter saw that sounds like a jet engine spooling up. If I let it get up to full speed and gently make the cut its still pretty smooth. If I get in a hurry I see those same marks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.