tomk Posted January 7, 2015 Report Posted January 7, 2015 I could use some advice to try to save a 10 year old Makita 2012nb planer from the scrap heap. After a heavy duty project, the planer is now seriously out of parallel...at leas 1/16 inch. Does anyone have experience with this model as far as readjusting the parallel? I have read in another forum that the only option is to send it to a manufacturer approved repair shop for adjustment, which means $$$. Thanks for any help! TomK Quote
..Kev Posted January 7, 2015 Report Posted January 7, 2015 I have no experience with this machine but, checking the blades should be the first step. Suggest fresh blades installed per the manufacturer first. Only then will you know for sure that the cutter head is out. Quote
wdwerker Posted January 7, 2015 Report Posted January 7, 2015 Careful measure of each side of the head to the bed will tell you if it's the knives or the head. Unplug the machine, plenty of light and some accurate method. I use my jewelers magnifying headset to get a close look at stuff like this. Could be the gear/ chain mechanism that adjusts the height slipped on one side, just guessing, I've never even seen this model planer. Quote
tomk Posted January 8, 2015 Author Report Posted January 8, 2015 Guys, Thanks much for your advice. Beforehand, I didn't think that the blades would be the problem, but you were both right. I cleaned up the carriage, removed any surface rust, replaced the blades, made sure they were seated well, and ...it's parallel once again. It seems that fine sawdust accumulated beneath one of the blades and after a mild deposit of surface rust, slowly forced it slightly out of line...just enough to create a cant in the cutting. I have learned a lesson thanks to you, and I can keep the warhorse around for a few more years. Cheers! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.