Jorge Bahena Posted February 27, 2015 Report Share Posted February 27, 2015 I am considering purchasing rockler's CNc machine. What is your take / opinion of such a machine. Thank you Quote Link to comment Share on other sites More sharing options...
Tom Cancelleri Posted February 27, 2015 Report Share Posted February 27, 2015 Are you referring to the CNC Shark? Seems like a decent machine. If you're looking at CNCs also check the ShopBOT and the Oliver Machinery CNC Quote Link to comment Share on other sites More sharing options...
dwacker Posted February 27, 2015 Report Share Posted February 27, 2015 I would go over to the CNC forum and ask over there. Today there are so many options available. Quote Link to comment Share on other sites More sharing options...
Mick S Posted February 28, 2015 Report Share Posted February 28, 2015 PB - Is there a CNC forum here or are you suggesting a different forum? Quote Link to comment Share on other sites More sharing options...
dwacker Posted February 28, 2015 Report Share Posted February 28, 2015 Cnczone is a helpful forum especially for the little machines. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.