comp56 Posted December 18, 2015 Report Posted December 18, 2015 so I have some large 6"x6" Tamarac wood, this wood is kinda overlooked many times but has very nice grain patterns usually and that is why I like it.... I'm going to make a knife block but not solid to match cutting board I recently made, I took a piece and planed it down on all sides then cut out the middle and carefully kept the grains in tact so when all back together it will look like a single piece of wood with center missing...... here is some glue up pics for the block and for the top insert with knife holes..... if you notice the grain is all over the place..... finished it up.....all sanded up square added a round over to break edge......also made sure knives fit ok....no seems looks like original block of wood.... gave it a mocca stain with some butcher block oil rubbed in to finish.... 1 Quote
wtnhighlander Posted December 19, 2015 Report Posted December 19, 2015 Good work on the grain match! Sent from my XT1058 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.