Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Refinishing maple workbench tops... sitting in garage for 13 years!

Featured Replies

Hi,

I have two 52 x 28 x 1.25" maple table tops that I'm trying to re-finish for a work-desk.

They have been in the house for ~1 month, but before then were stored in the garage (concrete floors) for about 13 years. There has been some cupping, but only enough to be noticeable standing a couple meters away.

Story so far:

Stripped the varnish and sanded down with random orbital using 80 then 120. Hand sanded down using 120 then 220.

On the first piece: Used minwax preconditioner followed by minwax natural stain.

There was significant blotching, so before ruining the second piece I am turning to the pros for help...

I was going to try a 1lb cut of shellac then stain it, or just shellac the whole thing and leave it as is. The wood looks fine to my untrained eye, but I'm concerned that storing it in the garage may have really dried out the wood which is why staining is so difficult.

Have also considered using a white-wash... Not sure what to do!
 

 

Sitting in the garage shouldn't cause problems with the finish, but any chemicals that were on the top could cause the stain to absorb unevenly. Maple can also be a tough wood to stain by nature.

You are on the right track to do shellac or some other sealer then stain over that. You may also want to consider using a gel stain. My best suggestion is to sand the bottom and do some test staining with various techniques.

There are hundreds of ways to solve the problem, but most of them involve some combination of sealing the wood so the stain doesn't absorb into the wood (i.e. coating with shellac) and/or using a finish that doesn't absorb as deeply (i.e. gel stain)

 

  • Author

Just realizing now that the majority, or probably all of the panels in the wood are flat-sawn, which if I read correctly is going to be near impossible to not blotch unless I use a sealer.

How many coats of 1-lb shellac would you use? I was considering just using de-waxed shellac and then a water-based Verathane "diamond woof finish: satin" for a top coat.

Having trouble finding Zinsser's SealCoat in Quebec. I'm only finding the large gallons which is a bit pricey... Is there another comparable product you would recommend?

You could order shellac flakes and mix your own, but I sense you would prefer to get moving a bit sooner. Is the regular zinnser shellac available locally? You can thin it to achieve the same cut as seal coat. If the small amount of wax is a concern, mix, thin, let rest overnight, then decant the clear stuff, and now you have 'dewaxed' shellac!

  • Author

Was going to pickup flakes and mix my own... Figured that would be best in the long run.

Will just using a water based poly topcoat be enough to seal the table? (I'm new at this)

I asumed that itvwould give a better finish, for whatever reason.

Going to just use the poly and see how it turns out, I have to re-finish the other table anyways, so I'll get creative on that!

thanks!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.