Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Blotch Control Redo

Featured Replies

My project is kitchen cabinets made of clear alder.  Heres the story.

 

i have completed the faceframe construction and use a 50/50 mix of bullseye no wax sealer and alcohol. I then stained one faceframe with Zar oil base stain. I am still getting blotches.

 

 

I did more reseach and came across Charles Neil blotch control.  This is a water based product.  Can I sand off the oil base sealer i put on and the use this water based product?  Will this work?

 

 

Please adise  My wife want the kitchen done LOL

Thanks

JIM

 

 

Edited by Greenthumb77
Spelling

If your oil stain has pigments, the "blotching" will be more intensified.

you won't get much noticeable difference with Charles Neil's stuff than you would with your shellac. I wouldn't waste my time there if you have already sealed.

You will never totally control botching with Alder, Maple, etc. you just hope to minimize it.

there is a good thread on dye staining above this one. I would check it out.

i spray multiple light coats of dye only and  get good results. If controlling it is a must, you would use a sealer first (shellac is fine), sand it back, spray or wipe your dye, then build your top coats.

you can also "tint" your topcoats with dye stain. I.e. Adding the dye to your lacquer or poly. 

Either of those should give you acceptable results.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.