rodger. Posted January 9, 2017 Report Posted January 9, 2017 My basement is not finished, and i use it mostly for storage. The basement ceiling is exposed I beams, which are engineered (OSB between solid wood flanges). Can I safely hang some light duty cabinets from the ibeams? (There is no stud wall). I realize that these beams are designed to be compressed, but is it harmful to the joists to suspend some light duty loads from them (like 100 lbs)? I would nail a 2*4 or 2*6 across a few of them so the load would not be concentrated on only one joist. Quote
Popular Post Tpt life Posted January 9, 2017 Popular Post Report Posted January 9, 2017 This should be just fine. The overkill artist in me would bridge the joists with blocking about 1/3 of the span in from each wall. This will limit any bounce caused by the added load. This is similar to a bathtub full of water so just treat it like that. Blocking those I joists requires furring out to the depth of the solid wood banding and then any block will do. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.