Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rolling Miter Saw Station

Featured Replies

Hey All,
I've been wanting to build a real miter saw station for a long time.  And every time I want to use the chop saw I have to set up a table, pull the saw out of storage, run an extension cord, look for some kind of shop buddy; usually a step ladder or stool...  Right now the miter saw is the dustiest tool in the shop!  This is despite trying to collect dust from the 2 inch port on the saw which only sucks up a small portion of the dust.  It's time to do something better!

I thought I'd share some of my research and thoughts.  I'd appreciate any and all feedback.

I've googled the subject many times and  I'd say the best I've seen comes from Jay Bates  

I've taken some ideas from his design and mixed it with this 
http://www.instructables.com/id/Combo-Miter-Saw-Station-Lumber-Rack/

From these ideas I've put together a carcass seven and a half feet long.  I chose this length because it'll fit nicely in the bed of a pickup truck and into a garage.  I have plenty of space now but that may not always be the case.  

I built a torsion box for the base using 2x3 pine boards skinned with 1/2 plywood.  I'm very pleased with how strong and rigid it came out and provided a great surface to attach the casters to.  Speaking of casters, almost everything in my shop is on wheels.  I've sourced all kinds of casters over the past couple of years and found that Home Depot has 4inch red ones with brakes.  They're $8 each and work really well.  I just looked for a link but couldn't find them online; but I have seen them in several stores.

I used my Kreg pocket hole tool build the rest of the carcass out of 2x4s.  I'm topping it with MDF and some kind of laminate, probably something with a microdot finish.  

Next up will be to create a stop block, I think I'll follow Jay Bates lead.  I think I'll set mine up so the stop block can go on either of the blade, left or right.

As for dust collection I'm going to build a tight shroud around the back side of the saw.  I have a 4 inch dust collector but I'm not quite sure what "interface" to use.  I see stuff like this is available 
https://www.pennstateind.com/store/DBGULP.html?gclid=EAIaIQobChMI0_KA0rPU1QIVk7fACh3XyAVREAkYBiABEgLwVPD_BwE
But it seems a bit big, I don't know.  Anyone have suggestions?

I'm still not sure how I want to use the underside of the bench, most likely drops, cutoffs and garbage cans.  
 

Anyway here's what it looks like right now

IMG_2663.thumb.JPG.24164fd005bd3c10211f1ad45a77556c.JPGIMG_2668.thumb.JPG.ed67216a73615ddc0e5e495b01702e5e.JPG

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.