Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Floor finishing advice.

Featured Replies

The floors in my apartment were poorly finished, and consequently, much of the old urethane finish has popped off.  I sanded the floor in the hallway down to bare wood and tried some SC Johnson Paste Wax on a 5' x 3' portion of it.  Unfortunately, as an allergy and asthma sufferer, I just can't handle the smell of the solvents evaporating off.  

Does anyone have suggestions for a different option that would involve few to no vapors?

It doesn't have to be the greatest option to protect the floors.  They don't get much traffic and the landlord will refinish the floors again at some point after I move out.  I'd just like something that isn't too unsightly in the meantime. 

If it helps, I have used a combination of beeswax and food grade mineral oil for furniture, cutting boards, etc. which did not cause problems, but when I tried it on a section of the floor it was way too slippery.  (I think I used a 5:1 ratio of mineral oil to beeswax.)  I've used tung oil with success in the past as well, but currently don't have anywhere to dry the rags and am concerned about rag combustibility/disposal.  Unfortunately, this also seems to knock out products with linseed oil.

Thanks in advance for any ideas.

- Liz

 

 

 

 

 

 

 

I wouldn't do anything to the floors. You're the renter. If you don't have them done right. He could come back after you? Why can't the landlord have someone apply the proper floor coating for you? 

-Ace-

  • Author

It's an old building and the floors were not finished properly in the first place.  The maintenance guys claim they used a water based finish left over from the previous landlord.  They think this was why the finish popped off, but I think the problem has more to do with the fact that the floors were *very* roughly sanded.  There are plenty of gouge marks from what I am assuming was a drum sander.  It looked like they started and finished with 30 grit at best.  Whether I finish the floor or not, they will have refinish it when I move out.  (And I have no immediate plans to move out.)  I spoke with maintenance, and they are fine with having me apply a wax finish to the floors.  At least it will provide some protection.

Anyhow, if the landlord doesn't have the maintenance guys handle it again, then he will hire the cheapest alternative he can find.  With one of the first floor apartments, they hired a budget friendly Chinese firm who probably did a reasonable job, but they put some sort of heaters in the apartment to dry the oil based finish which caused a lot of off-gassing and the vapors were a problem for me as they seeped up to the second floor.

I figure if I do the job, at least I can have control over what products I use, the amount of mess and disruption to my household I cause, etc.  Plus, I've been in my apartment for a while and my rent is well under market value, so there's not much sense in making waves.

At this point, I am thinking about linseed oil based, low VOC, low odor finish.  My city offers free hazardous waste centers.  I gave them a call, and they are willing to take rags soiled with linseed oil.

I'm still open to other ideas.  Likewise, if someone can recommend a low VOC, low odor floor finish, I'd be really interested.

Take care and thanks for your interest!

-Liz

 

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.