Cygnus A Posted May 6, 2018 Report Share Posted May 6, 2018 Can someone take measurements for me? I want to try building a slide out table for this sander order my outfeed tabke but I can't find the overall dimensions without the stand. I would need the overall height/width/depth including the handle. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Chet Posted May 6, 2018 Report Share Posted May 6, 2018 Its about 24 inches high at the handle but I can get a perfect measurement but it is no more. It is 40 1/2 inches from the back of the motor to the outside edge and 23 1/2 inches long without he extension tables or 45 1/2 inches with the extension tables. My extension tables are not the newer fold down. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Cygnus A Posted May 6, 2018 Author Report Share Posted May 6, 2018 3 hours ago, Chet said: Its about 24 inches high at the handle but I can get a perfect measurement but it is no more. It is 40 1/2 inches from the back of the motor to the outside edge and 23 1/2 inches long without he extension tables or 45 1/2 inches with the extension tables. My extension tables are not the newer fold down. Hope this helps. Definitely. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.