AcworthWW Posted November 12, 2019 Report Share Posted November 12, 2019 I am in the process of building a Bubinga and Wenge entry table for some friends. I would like to fill the pores on the top and base. I am looking at using Aqua Coat Grain Filler. My topcoat will be GF High Performance sprayed with an HVLP. I like the way that oil brings out the chatoyance on Bubinga and may give some depth to the Wenge. My question relates to using the grain filler over an oil. Has anyone used a product similar to Aqua Coat over something like a Seal-a-Cell or ARS base coat? Would there be any issues with adhesion assuming the oil coat has 3-4 days of cure time? Any information or suggestions are appreciated. Quote Link to comment Share on other sites More sharing options...
Chip Sawdust Posted November 12, 2019 Report Share Posted November 12, 2019 I’ve used Aqua Coat over shellac but I’m not much help otherwise. First time I used it was on a sofa table I built this summer. I put wax on top of the Aqua Seal. I’d say sapele is about as grainy as wenge but wenge can be pretty grainy for sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.