Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Take two on wooden hinges

Featured Replies

I decided to try a more integrated approach to wooden hinges. Instead of making a hinge and tacking it on, I just made a big box joint. I then clamped it together and drilled a hole in each side. Before gluing everything in place, I used a belt sander to radius the edges for clearance. It is important to not to take off too much. I like to take off just enough to move easily without leaving a large gap you can see into the box through. You also just want to radius the edges, and leave the back flat. This lets the lid open to about 95°, eliminating the need for any additional stops. Next I took a bamboo skewer and some CA glue and glued the skewer in to the inside (moveable) portion only. After the glue was set I mitered the edges, which cut the skewer to size. This also hides the skewer once the box is assembled.

post-153-0-00243800-1300872316_thumb.jpg

Back View

post-153-0-04398600-1300872488_thumb.jpg

From the side

post-153-0-76716000-1300872534_thumb.jpg

And finally a bird's eye view.

Hope yall get inspired and show us some different ways you like to make them.

Not that the one you did before was bad, but the integration of the hinge here is the next step in the evolution. How big is the box?

  • Author

Not that the one you did before was bad, but the integration of the hinge here is the next step in the evolution. How big is the box?

I made this from scraps from another project and it is small. It turned out at 5" wide and 3" deep.

I made this from scraps from another project and it is small. It turned out at 5" wide and 3" deep.

I wondered. The hinge seemed to over power the box, but now I know why. That was sort of my suspicion. I think that on a larger box making a couple of these versus running it all the way across the back might be nice. Kudos for your journey on this wooden hinge trek.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.