kawman Posted July 7, 2024 Report Posted July 7, 2024 I just purchased a used Powermatic 60 HH 8" Jointer and was wondering if anyone knew how to adjust the non-more insert located on the fence as mine is not flush with the fence and will snag the boards as I am running them through. Quote
Von Posted July 8, 2024 Report Posted July 8, 2024 No idea, but Google turns up a manual readily: https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://images.thdstatic.com/catalog/pdfImages/d7/d766594b-1756-4068-8e30-836990f36342.pdf&ved=2ahUKEwjyn-XPxZeHAxWpFjQIHaSYALwQFnoECA8QAQ&usg=AOvVaw2DzauMgGdEREZi6F52AniZ Quote
Chet Posted July 8, 2024 Report Posted July 8, 2024 On 7/7/2024 at 10:29 AM, kawman said: mine is not flush with the fence They are all that way. Why, I don't know. But unless you are maxing out the width of what you are face jointing all you need to do is move you stock just a smidge the other way to miss it. If you are catching it when you are edge jointing then you need to make another pass on the face to get it flat so it while be flush with the fence. Quote
kawman Posted July 8, 2024 Author Report Posted July 8, 2024 Yup that's what I've been doing, I didn't know if there was a way to adjust it, thanks for your response! Quote
Eva Posted July 23, 2025 Report Posted July 23, 2025 Any update on if the non mar insert can be adjusted (when it becomes no longer flush with the fence)? I work in a teaching shop and beginner students keep getting stuck on the lip where the insert falls inside the fence. I tried adjusting by taking apart the fence but it didn't move the insert at all. Quote
Chet Posted July 23, 2025 Report Posted July 23, 2025 I have recently seen examples of people using blue tape to make it flush with the fence. Packing tape may work also. 1 Quote
Ron Swanson Jr. Posted July 23, 2025 Report Posted July 23, 2025 On 7/23/2025 at 11:03 AM, Eva said: Any update on if the non mar insert can be adjusted (when it becomes no longer flush with the fence)? I work in a teaching shop and beginner students keep getting stuck on the lip where the insert falls inside the fence. I tried adjusting by taking apart the fence but it didn't move the insert at all. Have you contacted powermatic? I'd bring it to them first. Probably not the first time they've been asked about it. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.