armstrdm Posted April 24, 2011 Report Posted April 24, 2011 I want to upgrade the fence on my Hitachi C10FL table saw (the one it came with is really awful). Do you guys know of anyone that has (or have personal experience with) upgraded this saw with the Delta fence? I doubt it will bolt directly, but can it be fitted to this saw? Thanks F Quote
mikem Posted April 24, 2011 Report Posted April 24, 2011 I put the T-2 on my craftsman TS. While not the same TS, the bolt holes did not line up with each other. I ended up drilling new holes into the TS cast iron. It was a little bit of work, but well worth it. Quote
A_Vitale Posted April 29, 2011 Report Posted April 29, 2011 I agree with mike, my delta ts350 did not fit the t2 fence but after drilling new holes and installing the fence I am very happy with it! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.