outofstepper Posted June 26, 2011 Report Posted June 26, 2011 Picked up a Disston D8 in nice condition but not sharp.. cleaned and oiled the handle; when it came to sharpening i noticed the saw has a bit of a "belly" to it.. maybe one full tooth height higher in the middle -- if not two.. let's call it a 1/4" or so. My gut reaction is to just joint the saw and let the file ride the belly, figuring once all the teeth are sharp it won't make a difference.. but I thought I'd check here first. Worth the trouble of jointing the whole saw absolutely straight? Will it make a big diff? -Tony Quote
aengland Posted June 26, 2011 Report Posted June 26, 2011 i noticed the saw has a bit of a "belly" Worth the trouble of jointing the whole saw absolutely straight? Will it make a big diff? -Tony Well, that's the signature of older vintage (serious quality saws). That's how they were manufactured. As we users joint, file, and set over time, the belly will eventually diminish. Sounds like you've got a goldie oldie! Congrats Quote
Jonathryn Posted June 26, 2011 Report Posted June 26, 2011 If the line of saw teeth is convex--that is, the teeth in the middle stick out farther--then just sharpen it. That's how it came out of the factory and it'll saw more efficiently that way. If the teeth at the toe and the heel stick out more and there is a hollowed-out crescent in the middle, then joint the toe and heel. Saws get dull on the teeth that are used the most--the ones in the middle--and it would appear that many people in the past would sharpen only the dull teeth, which would eat away at the middle till you get that concave profile. Pictures help. Quote
Bob Rozaieski Posted June 27, 2011 Report Posted June 27, 2011 As has already been mentioned, the tooth line was intended to be that way. It's called breasting, and the geometry was designed to cooperate more with the natural arc of the sawing stroke. A breasted toothline in a long saw makes for a less jarring cut than a straight toothline, or so the theory goes. Now if the tooth line is hollow (concave), that would be bad, but it does not sound like that is the case. Quote
outofstepper Posted June 27, 2011 Author Report Posted June 27, 2011 Thanks all. Good to know this saw hasn't see much use. Hopefully my sharpening does it justice. Its a D-8 with the thumbhole and I must say this handle feels incredibly comfortable. Looking forward to a good performer. -Tony Quote
Darnell Hagen Posted June 28, 2011 Report Posted June 28, 2011 Cool, I have a breasted D8 Dual Grip, too. It was my wifes uncles fathers, he was a full time carpenter, and used it so much that the already taper ground blade is worn .015" narrower than factory. I filed it with an aggressive profile, and boy does it rip. It's my hotrod handsaw, and the one I go to to impress the Normites. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.