reforzar Posted July 16, 2011 Report Posted July 16, 2011 I've recently been eyeballing the Shapton Glass stone system. I think I would really like it. My one thought about it is could I use DMT Dia-Flat Flattening Plate or even just a Diamond Stone (DMT 8-Inch DuoSharp -Extra Fine/Fine) to lap the glass stones? I mean that's basically the same thing as the Shapton Diamond Lapping Plate, right? Plus I could save a few hundred bucks Quote
aengland Posted July 17, 2011 Report Posted July 17, 2011 I've recently been eyeballing the Shapton Glass stone system. I think I would really like it. My one thought about it is could I use DMT Dia-Flat Flattening Plate or even just a Diamond Stone (DMT 8-Inch DuoSharp -Extra Fine/Fine) to lap the glass stones? I mean that's basically the same thing as the Shapton Diamond Lapping Plate, right? Plus I could save a few hundred bucks By all means let us know what you do! I'm almost ready to order some water stones, too; I'm just not sold on the hard ceramic stones just yet. Still trying to process. BTW, I'm successfully using oil stones so that's why I don't get the need for really hard ceramic stones with super aggressive cutting speeds--except that I don't want to make a career out of sharpening. BTW, best deal I've seen on Shaptons is on Chefknivestogo. They've got some package deals that could save you substantially. Also, have you checked the competition: Naniwa super stones (slower but better honing/finish with fewer grits--stops at 12k) or Naniwa Chosera (sound great but pricey--actually TFWW have them for only $100 more than Shapton pro stones (if you stop at 15k) or cheaper if you buy the 30k). LV has equally competitive stones--Bester/Imanishi or Sigma Power ceramic Select IIs--that are significantly less pricey. If you haven't read Stu Tierney's blog (toolsfromjapan)in which he tested water and ceramic stones, you ought to take a look. Bewarned, however, it's overwhelming but good. Arch near NOLA Quote
wilburpan Posted July 18, 2011 Report Posted July 18, 2011 I've recently been eyeballing the Shapton Glass stone system. I think I would really like it. My one thought about it is could I use DMT Dia-Flat Flattening Plate or even just a Diamond Stone (DMT 8-Inch DuoSharp -Extra Fine/Fine) to lap the glass stones? I mean that's basically the same thing as the Shapton Diamond Lapping Plate, right? Plus I could save a few hundred bucks I use an Atoma 400 grit diamond stone for flattening waterstones. They work great. The Atoma has small grooves in the surface that give the waterstone grit a place to go as you flatten. The DMT's don't, which tends to cause the waterstone to stick to the DMT from surface tension as the waterstone gets closer to flat. Probably not a dealbreaker, but it's annoying, and annoying things will cause you to flatten your waterstone less, which makes sharpening less efficient. Here's a video of how I use an Atoma diamond stone to flatten a waterstone on my blog. Quote
RenaissanceWW Posted July 18, 2011 Report Posted July 18, 2011 I have used a DiaSharp stone for flattening my Shapton glass stones now for almost 5 years. No problems. Quote
DeGauss Posted July 18, 2011 Report Posted July 18, 2011 I also use a coarse DiaSharp to flatten my Shaptons. Works great no issues. -Gary Quote
reforzar Posted July 21, 2011 Author Report Posted July 21, 2011 Thanks guys for the replies! RenaissanceWW, do you also use a coarse DiaSharp? I didn't know which grit to get! Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.