baok Posted August 30, 2011 Report Posted August 30, 2011 I bought a knockoff rabbett plane off eBay. (AMT? brand - can't remember. It's at home). It seems to work well enough except that the shavings pile up against that hold-down thing (cap iron?). They fold up like an accordion and clog the mouth very quickly and have to be dug out with the end of a pencil. Any ideas as to how to grind off parts of that cap iron so as to direct the shaving elsewhere? Quote
wilburpan Posted August 30, 2011 Report Posted August 30, 2011 Can you post a picture of the plane? That would help. Quote
jwatson Posted August 30, 2011 Report Posted August 30, 2011 picture would be helpful but might check to see if the cap iron is flat to the iron. its possible its not which you can take the cap iron and where it contacts the iron take it to some sand paper and flatten it till its perfectly flat to the iron. Quote
baok Posted August 30, 2011 Author Report Posted August 30, 2011 OK, here are some photos of the problem. The first is the plane before planing. The second shows the shaving piled up after making one pass over some pine. The third shows the shavings from the other side. https://picasaweb.google.com/105906602072003237045/8302011#5646782071776583522 https://picasaweb.google.com/105906602072003237045/8302011#5646782075790747970 https://picasaweb.google.com/105906602072003237045/8302011#5646782084540469938 It's black so it's kind of hard to see details but I think the message gets across. Quote
wilburpan Posted August 30, 2011 Report Posted August 30, 2011 It looks like the shavings are getting hung up on the area where the cap iron is meeting the blade. The picture I am uploading is of a Stanley 78 rabbet plane, which should be nearly identical to yours. The red arrow shows the area where I think the plane shavings are getting hung up. There are some things you could do to optimize this. First, as jwatson suggested, get the cap iron to meet the blade more closely. The best way to do this is to flatten the area where the cap iron meets the blade just like you would the back of a chisel or plane blade. Second, see if there is a way to allow the cap iron to seat closer to the edge of the blade. This may or may not be possible. Third, take a file to the front side of the cap iron to make it as smooth as possible. All of these things will help the plane shavings follow a smoother path, and not get hung up. Finally, try taking a thicker or thinner shaving. Sometimes altering the shaving thickness will alter how it curls, and make the difference between hanging up and ejecting smoothly. A rabbet plane, being a joinery plane, does not have to leave a finish-ready surface, so you can go for thicker shavings if needed. Quote
baok Posted August 31, 2011 Author Report Posted August 31, 2011 Thank you gentlemen; I think I've got a couple of things I can do easily. I was not relishing the idea of doing a lot of grinding to change the shape of the cap iron drastically. It will be a few days before I can do this but I'll report back with results eventually. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.