duckkisser Posted October 12, 2011 Report Posted October 12, 2011 we have a 1 hp dust collector and i was wondering if we can put two dust collectors on the same line that goes into a 55 gallon drum? so we would have two seperate 1hp units rather then spend thousands on a large unit. Quote
Beechwood Chip Posted October 12, 2011 Report Posted October 12, 2011 Do you mean, two input ducts going into two blowers going into two filters going into one drum? That should be fine. You might want to put in a backdraft damper so if you turn one blower off the air doesn't go out through the blower. I don't know if that would be a problem or not. If you only have one filter, then if you run the two blowers at the same time you'll be limited by the filter. Quote
dwacker Posted October 12, 2011 Report Posted October 12, 2011 Not unless you increase the port size. The port will only flow so much. Don Quote
duckkisser Posted October 12, 2011 Author Report Posted October 12, 2011 hmmm sounds more difficult then i thought was going to have two dust collector hoses conected with a "Y" joint and have it sucking at the single hose that goes into our 55 gal drum. hardly any dust goes into our dustcollector itself just the realy light stuff. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.