Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Roubo top

Featured Replies

Is there a compelling technical reason why the top is 4" thick or is it a stylistic thing?

thanks

A good bench needs to be super heavy so it doesn't move on you and so it can absorb shock when chiseling.

From what I've heard, once you get up to the 4" point pretty much any species of wood will be strong enough for a bench top. Softer woods may not perform well on thinner tops, so you might get some sagging or deflection under heavy loads.

If you are planning on using the Benchcrafted tail vise then you should know that it is optimized for a 4" thick top. If you install it in a thinner top without shimming the underside of the top, the handwheel may stick up above the surface of the top. Plus you have to cut a 2" deep pocket under the top for clearance for the vise screw. With a 4" top, you'd still have another 2" of thickness left above the pocket.

To be clear, you could use the Benchcrafted vise on a thinner bench, but you'll have to adapt a bit.

I wouldn't go thinner than 3" for a solid feeling top, personally.

Heavy, Heavy. I am getting warn out joining king-sized eight foot boards of 'soft' maple. I just put a new 40 tooth narrow rip saw blade in my Unisaw.

Its still hard pushing the 2 inch plus maple through to get my 4inch + board to join and surface for the top.

I am wondering if I can lift either of the two tops to surface on the planer!!!

Luck to others involved with this heavy work?!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.