Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How do I hold this Veritas Edge Trimming plane?

Featured Replies

I got a Veritas Edge Trimming plane but I'm not sure how I'm supposed to hold it. I got the Left handed version, it seemed to fit my right hand the best but which way do I hold it?

#1 or #2 (attached)?

The person who helped me at LV said it's not designed for one hand or the other, you use one how you would normally want to hold it but the skew is to the left or right. But I'm sure there's a best way to hold it. The top picture I'm using my right hand, the bottom I have to use my left hand, not sure which is the most comfortable yet but I'm sure there's a wrong way.

I wouldn't try and guess based on the pictures unless you've actually held one, it's a different ballgame once it's in your hand. I can't really put it through it's paces to see what's ultimately best because I might have to return it unused if I decide to get the right hand version.

Sorry, but I have never used these planes. I did a quick search on the web, but I wasn’t too successful in finding pictures to help describe how to hold these planes. For what they may or may not be worth in answering your question, I’ve included the links to 3 sites I found. You’ll have to determine from these pictures how this translates to your left hand plane. I’m hoping others will provide information as well.

First webpage. Scroll down toward the bottom of the page until you see two pictures that show someone holding the plane. Second webpage. The top (and only picture) shows pulling the plane toward you. Third webpage. Sort of a review. Scroll down until you see the reviewer holding the plane in two different pictures.

I am not too familiar with those planes, but I would s#1 simply because the angle of the blade will push the edge *into* the workpiece.

On #2 the angle of the blade pushes the edge fibers sways from the piece, possibly causing tearout.

  • Author

John Fitz, what do you mean into the workpiece? It's an edge plane, there is no "into" anything, the shavings get thrown off one edge or the other unless I'm missing the big picture. The skew shouldn't matter at all if you're jointing edges, maybe if you're using it as an edge banding trimmer?

Thanks for the links Onboard, on one picture I see in link #3 he's holding the plane as I would if I were forced to plane in the other plane direction (picture #2, the uncomfortable position). Weird. That lumberjocks review has him holding it in both positions, thumb wrapped over the top and then fingers wrapped over the top.

Hey Rob - sorry 'bout that, I was going off what I *thought* I saw in the pics (I had a rabbet plane in my mind for some reason). Belay that.

Looking over the info for those planes, I'd say you are OK either way that feels comfortable, as long as the face you are using for reference will be perpendicular to the edge, and as long as you can go with the grain. I believe there is a left-hand and right-hand version so that you can go 'with the grain' on a piece where you must use one specific face as a flat reference because the other face can't be used - for instance, a piece of moulding.

This pic from their website made sense to me. As long as you can go with the grain, any grip should work.

post-5094-0-49462700-1321626119_thumb.gi

Bob I have both left and right of these planes and have used them for a few years. The left and right allow you to work in either direction as the grain changes. The easy answer is that there is no right or wrong way to hold these. The key is to always keep the fence referenced against a reference edge. The purpose of these is to keep the blade at 90 degrees to whatever face you reference the fence against. So there are times when my reference is the face of the board and I am pulling the edge into square so I will push the but of the plane into my palm and my fingers down holding the fence into the wood. Often I will do it two handed where my other hand pressed the plane down in front of the iron. In this instance the blade is horizontal.

Other times I am squaring end grain and I set the boar flat on the bench and reference the plane fence on the board face. The iron is now oriented vertically and pushed across the board.

In either instance the skew of the blade wants to pull the plane one way of the other. You use the plane with the orientation that will pull the fence up tight against the work. This is very hard to explain in text unfortunately. Basically the sharp point of the iron should pointing towards the direction you want to pull the fence.

Bob I remember Chris Schwarz did a short video on the vertical method of using this plane and here is the link http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/use-the-no-95-trimming-plane-upright

Maybe that will help, but really just focus on keeping the plane fence against your reference surface and hold it however it feel comfortable for you.

  • Author

Okay, I just spent the evening playing with this thing and I do think pulling it towards you is best for me, I also think I got the right one (left handed) for my right hand and stance. Man, I can get a whisper-thin shaving from this thing, so nice. I had to play with squaring the blade for a good hour though, I hope those set screws help me when I have to resharpen the blade. I would not want to do that when I'm ready to get something together. I also find if you screw around too much you take the flatness out of the long edge, it's easy to make an unintentional spring joint at the middle - I had a run a couple edges through the jointer to fix. Very fine shavings I'm proud to say once you set the darn thing.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.