Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

50" TV stand

Featured Replies

Started this with Brazilian Cherry and Paduk. I am not a master joiner by any means...but would love some ideas on the legs. I am planning on doweling the leg in and then to the bottom shelf as well for structural support...any other ideas for this?

IMAG0058-Copy2.jpg

IMAG0074.jpg

IMAG0075.jpg

I like where this is going!

If you are looking to lighten the legs a little bit, perhaps you could taper the inside two faces of each legs, from just below the bottom shelf down to the floor.

You will likely have to play with some test pieces to see how much to take off, but I'm guessing a 25% reduction would look good (1/2" taper, assuming those are 2"x2" legs).

  • Author

I like that idea Torch! I with the style I was doing this in, I kinda went for the block look rather than hit the lathe...but adding a little contour to the leg might be a damn nice touch!

What do you think about the structural integrity of relying on doweling? Do you think that will be enough to keep it stable?

Do you plan to dowel into the top or into the apron? Apron would be best, IMO.

On the connection to the lower shelf, can you still cut a small dado into the leg? A dowel inside the dado going into the shelf would probably be the strongest. This would give you a horizontal ledge for the shelf to rest on plus some extra gluing surface.

I like the tapered leg idea, 1/2" on a two in leg might be a bit too much if you're only doing it to the bottom 6" or so.

Just my 2 cents.

Joe

  • Author

Thanks joe. Thus far, this this what I have done. I did dowel the top, of course...then I did 2 1/4 dowels in the apron. I also dropped 4 corner brace "l" brackets on the "L" .

i went for full structural integrity on this one. Wish I had thought of the dado in the first place... damn. that was a perfect idea.

this is what I have now. Tung oil finish cut 50% with mineral spirits.

IMAG0119.jpg

IMAG0118.jpg

IMAG0117.jpg

IMAG0114.jpg

IMAG0110.jpg

  • Author

structurally, I am impressed. Visually....many things I would have changed. 1st would be mitering the box facving...second would be inlaying the facing. 3rd would be tapering the legs for much more visual appeal. Not bad from a google sketchup that I changed about 15 times :)

thanks for the input and I appreciate it. Please keep it coming for future reference!

*S*

  • Author

And its delivered. Dad loves it, fits his decor pretty good. I love the way the Brazillian cherry finished out. They say the Paduk will brown over time...I hoping a long time!

Still wish I had done something more fluid to the legs instead of the blocky look. Dad wanted it that way though. Tough to argue with the client!

dadtv2.jpg

dadtv.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.