Eric. Posted December 24, 2011 Report Posted December 24, 2011 I bought a Magswitch featherboard yesterday, and just did some ripping with it this morning. Seems like it doesn't hold that well, definitely not enough to prevent a kickback. At first I thought it was holding well enough to keep the stock tight against the fence, but after a few boards I noticed that it drifted 1/16" or 1/8" away, enough so that the stock had play between the featherboard and fence anyway. I thought maybe because my table is nice and waxed and dusty...I cleaned the dust off and tried again, but same result. It holds really well downward...there's no way I could pry it up. But I can fairly easily slide it around on the table. Is this normal? Quote
dwacker Posted December 24, 2011 Report Posted December 24, 2011 Pretty much. I tried and returned them. Think about how a magnet works with north and south poles. Don Quote
Barron Posted December 24, 2011 Report Posted December 24, 2011 I have used one for the past 3-4 years and and found it works very well. The only problem is when the magnets line up with the miter slot, but this is rare. Barron Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.