Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Metric Cut List because BF is "bs" to us progressive types :)

Featured Replies

I sat down with some graph paper and worked on a cut list that makes sense to someone in a timber yard in the metric world. I grouped the timbers into one hardwood for the vises, dog holes etc and one for the rest (maple) so that the finished product well my one at least will have a nice contrast.

Attached is the scanned pdf of the Roubo Metric cut list, what boards are cut from each piece and the

standard timber types to buy.

Hope this helps the others in the build playing in m rather than "

Cheers

Chas

roubo-bench-metric.pdf

Wow, what a great post! Thanks so much for sharing your hard work with the rest of us.

I noticed one small correction, though it is my fault and not yours. In one of the early cutlists, I mistakenly called for 3 of the endcaps (Part F) which was a fat finger error. Only one is needed for the basic design, and this has been corrected in the most recent version of the cut list. My apologies.

  • Author

Aaron, thanks, yes I was looking at the original cut list.

So looking at it we would still need to get the 1.8m length in any case because of that "Q" runner piece. That board is going to require a lot of thought as there are multiple thicknesses to put through and generate with the jointer/thickenesser.

The reason I am using multiples of 0.3m in length is that is the basic cut length dimension most timber yards supply (sell) at in Australia. Note also that the boards are assumed to be rough cut. There is plenty of meat there.

I'm picking up my stock for the bench at the end of Jan as I have to finish my adirondack chairs. The wife won't let me start on the bench till she is sitting on them looking out over the ocean from our front deck.

Cheers

Chas

Another option for the runner is to just integrate it into the long stretcher in the front of the bench, and not make a separate piece. It looks like your plan is to cut the long runner from a rough board 125mm wide. You could probably just squeeze it from that, and worst case maybe the front rail isn't quite as wide as the plan.

I think this is how Vic did his runner, see his post here: http://tumblewood.blogspot.com/2011/12/beefy-base-tww-roubo-build-part-6.html

I just sat down to do the conversion myself then found this thread. Thanks so much Chas.

I'll be doing my build in imperial units, but I assume purchasing the lots in the sizes you've outlined would still allow me to do this yes?

Thanks,

Af.

  • Author

Yes, I am actually doing exactly the same. Buying in Metric but building in Imperial. The main issue we have here in the metric world is that lumber yards sell in standard sizes by the lineal metre (well in multiples of 0.3m) not in a volume measurement like BF.

Cheers

Chas

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.