Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How can I connect my Ridgid vac to my Domino?

Featured Replies

I have a Ridgid 16 gallon vac. I made a coupler to attach my vac to my domino but it's not perfect and I need a better way. Vac hose is about 1.75" outside diameter and domino intake is a shade over 1". I need a better solution.

I would recommend taking the domino To Home Depot and playing with hose fitting until you find oe that works. If that doesn't work, you can always buy a Festool hose. They're expensive, but they will fit both the domino & Ridgid vac without modification.

What does the coupler that you made look like? What is "not perfect" about it? What would make it better?

-- Russ

My fein came with a little 4" piece of rubber hose. It's too large also but by the time you push it on all the way to the body of the domino it works fine and doesn't fall off. Maybe just a chunck of hose from an auto parts store.

Don

  • Author

What does the coupler that you made look like? What is "not perfect" about it? What would make it better?

-- Russ

i will try to snap some pics of it when i get a chance. it's a esentially a grey pvc coupler that i had to dremel out to fit both hoses. with enough back and forth movement it will eventually wiggle off the domino. as far as dust collection goes, it operates almost 100% effecient. i have no particles or visible dust after a series of cuts. i just feel like i can do better. i've already played with different couplers at the home depot, but have ultimately been unsuccessful. ideally, i'd like to find a fernco fitting (rubber coupler with strap clamps on each end) that would work.

The Festool hoses use a 2 1/2" fitting on the vacuum end, so they'll connect to any standard shop vac. It's not the cheapest option, but it will give you the best fit to the Domino for sure.

- Mike

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.