Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Adding some Drawers to the Roubo?

Featured Replies

I am planning on building the Roubo with a few changes.

1st: I am going to pass on the leg vise and go with the Twin Screw.

2nd: I am planning on adding some drawers in the wasted area beneith the top.

I would like for someone to tell me if they see any possible problems that I could run into with this design. I left a small gap between the bottom of the top and the top of the drawers so that I could mone any clamps or get to stuff that falls in the gap. I will not be using the deadman with a long holdfast, just small plugs for support. I will also use "push to open" hardware in order to keep the faces of the drawers flush (no exposed handels).

I do not want to finish this build and then find out that I am now limited by the drawers. However, I am going to finish the bench before adding them, so I have a little while to think about it.

ANY IDEAS????

Thanks

post-1850-0-55892000-1327128865_thumb.jp

Hey Jeff, I do not see any problem with the drawers as long as you retain a good sized gap for clamping and retrieving items falling through the dog holes and that you keep the setback from front/leg surface that you show on the diagram.

Looking at the plan the deadman looks sort of lost. To my eye it hardly offers any compliment to the twin screw. Perhaps using the deadman with the holdfasts on the right leg give you some capability. Perhaps a couple of dog holes on the deadman that are above the drawer assembly would give you the ability to use holdfasts in conjunction with long boards secured on the left by the twin screw. If the dog holes are placed so that the holdfast rod is same level as the twin screw posts you have valuable functionality.

Good luck with your build.

Looks like you have put some good thought into the modifications. I like the idea of the push to close/open hardware for the drawers. Very cool.

I noticed the holes in the left front leg also. Can you share how these will be used?

You may want to look on benchcrafted's site at their shaker style bench. There may be some good ideas there.

yeah i cant see any major reason not to include a set of drawers, assuming all clamping and clearance needs are satisfied.

And can i just say how cool it is that people can just take the SketchUp model and modify it to their liking? This is exactly what I hoped people would do with these builds.

  • Author

Looks like you have put some good thought into the modifications. I like the idea of the push to close/open hardware for the drawers. Very cool.

I noticed the holes in the left front leg also. Can you share how these will be used?

You may want to look on benchcrafted's site at their shaker style bench. There may be some good ideas there.

The dog holes on the left are for extra support. I work a lot with large chunks of rough wood. This is because I like to leave live edges on a lot of by projects. I just thought if I ever need to clamp a large peice of black walnut that is 4" - 6" think and 10" - 12" wide, it would allow be to take some of the pressure off of the vise and let a dog or holdfast carry some of the weight. Some of the slabs that I get take a tractor to load.

I included a picture of my dining room table that I am finishing right now. I hope to have it moved up stairs next weekend. It will give you an idea of what I am talking about. It is a bad picture with my phone, but when it is complete I will put some good picture in the gallery.

post-1850-0-31596200-1327209235_thumb.jp

post-1850-0-10150900-1327209347_thumb.jp

Jeff, I'm with you. I have been planning on producing a cabinet that is going to find it's home underneath the bench top. It just felt like too much open space for my liking and in a smaller shop every inch not being utilized for production, storage etc drives me mad.

I am toying with the idea of making the box removable from the back side of the bench so it can be used as a job/tool box as well.

Matt

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.