Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

So what have I here? (Picture Heavy)

Featured Replies

I've been going through some old tools and ran across some items...maybe y'all can shed some light on them...

First up...They seem to be some kind of a clamp...

NorthwestHarris-20120128-00017.jpg

Next...an old plane...I can't find any makers mark on it...simply 'Made in the USA' and the fact it appears to be old...

NorthwestHarris-20120128-00013.jpg

NorthwestHarris-20120128-00012.jpg

NorthwestHarris-20120128-00011.jpg

NorthwestHarris-20120128-00014.jpg

lastly...some old saws. I think the first one is a Miter saw...but I'll let the experts tell me...

The rest....well...I've never done much with hand saws, I expect that will change over time...so I might as well see what I have and start using it.

MissouriRiver-20120128-00009.jpg

NorthwestHarris-20120128-00008.jpg

NorthwestHarris-20120128-00010.jpg

I'll take a poorly aimed stab at the plane. It looks like a No 5 jack that resembles my father's old "made in USA" No 4 Handyman from the 50's/60's with the bakelite grips. It is missing the Handyman logo on the chip breaker.

The plane looks like it could be from the Defiance line of Stanley planes. I've got a Defiance smoother and it looks similar (blade, bailey knob etc.) it also didn't mention Stanley or Defiance anywhere other than the tote iirc.

I wonder if that first pair of "clamps" are some form of bench dogs. If you slid the them down into a square hole, do you think they could be used as hold-downs?

  • Author

I'm going to have to check on the plane and see if I can find ANY manufacturers marks. From looking at the blade I think I may just order a Hock blade for it and clean it up...see how it works.

On the clamps...I doubt they would work in a dog hole. The steel on them is thin and toothed like an F Clamp...

I think of them as clamps because of that and the rubber pad on the end...still have no idea what they are for...

the top are cheap clamps similar to a hold fast and the plane is a no 5 not sure of the brand though but that seems to be the consensus.

I'm going to have to check on the plane and see if I can find ANY manufacturers marks. From looking at the blade I think I may just order a Hock blade for it and clean it up...see how it works.

Check the tote, if it's a Defiance it may have it stamped there. That's the only place I could find it.

Here's a pic of the Defiance smoother I have from before I cleaned it up, yours looks to me like it could be a jack plane of the same style

020.jpg

021.jpg

I think... Could be wrong... That the clamps are the hold downs for an early model WorkMate.

On the clamps...I doubt they would work in a dog hole. The steel on them is thin and toothed like an F Clamp...

I was right, they came with the Black and Decker Grip Mate, or something like that.

post-5547-0-06930800-1328113275_thumb.jp

  • Author

Thank you all...

Seems I have the clamps, but not the steel inserts...

I"ll stash them to the side, maybe I'll find a use for them someday.

  • Author

Well I tore it down last night and cleaned off most of the grime and grease with some DNA...

It is a stanely made plane, but nowhere is the name stamped.

The markings on the base and frog match those from some hardware store resellers in the 40's and 50's, but the Japan coat is blue rather than other options.

From what I'm reading that means mine is a series 20 made int he 60's and it is indeed a #5...

Going to see if I can get the blade sharp and learn how to operate on this plane before I decide where to go next

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.