rodger. Posted April 1, 2012 Report Posted April 1, 2012 I received my first shoulder plane at Christmas from my wife. It's a Veritas medium shoulder plane, and I don't know how I survived without it for so long. Anyways, I've used it a few times and was wondering if you guys put a microbevel on your shoulder plane baldes. I use the microbevel technique on all my handplanes and my chisels, but was wondering if the technique was appropriate for the shoulder plane. Quote
ChrisG Posted April 2, 2012 Report Posted April 2, 2012 Completely appropriate. It will raise the included angle of a attack a degree or so, but you'll still be at an included angle of like 42 degrees which is just fine for end grain. Actually even if you raised it higher you'd be just fine on end gain - whatever makes it easiest for you to get your blade sharp and keep it sharp is the way to go. 1 Quote
RenaissanceWW Posted April 2, 2012 Report Posted April 2, 2012 I agree with Chris but honestly I never bothered to put a micro bevel on my shoulder planes. The blade is so small to begin with that refreshing the edge takes no time anyway. I pretty sharpen all free hand these days but even before I did shoulder plane blades were always tough to grip in a jig because of the narrow profile. So I started free handing with these blades. Not having to worry about a micro bevel in this instance makes it a lot easier. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.