Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anti-static blow gun?

Featured Replies

Anyone have experience with Ionix anti static cartridges used to blow off surfaces before finishing? I recently saw advertising for this product. They suggest it for auto and woodworking finish work. I looked for reviews and wanted more input before spending $150 or more.

We use water-bourne finishes in a small custom shop with no spray booth so dust is an issue for us.

I dont see it stopping dust nibs. I use a swiffer duster and swiffer pads as tack cloths they work well. Dust still gets in the finish unless you leave the room and keep the air stagnant with no movement until the finish cures. Personally I think its just the nature of the beast when you dont have a spray booth. Id save the money.

Don

Wdwerker...this is interesting topic and would like to learn more.

I know in the water-based automotive repair, they use compressed air panel driers to blow air over water-based automotive finishes to speed the dry and static can be an issue. So this add was to eliminate static while blowing dust off wood?

Do you have a link you can provide for the advertising?

  • Author

I looked and can't find the ad. It was a link in an email from one of the wood industry professional publications. Tried to Google "Ionix" brand and had no luck there either. The website listed many different models for shops and industrial finish lines. I will see if the ad is in my history buffer tomorrow, long day in the shop today!

  • Author

I found it! http://emailactivity.ecn5.com/engines/linkfrom.aspx?b=553875&e=191923876&lid=1742738&l=http://www.ionixtechnologies.com/DailyBrief.html

Cabinetmaker Magazine email newsletter. Ionix Technologies In Boca Raton Fla.

Going to try Don's swiffer idea today. How does everybody else clean and prep between coats of finishing? Does anybody use water- Bourne finishes,if so what kind?

I use ML Campbell Agualente , it is a pre- cat acrylic. Trying the new sanding sealer on our current project. I have been taking pictures during the build of 16 case pieces for a office/library in an attic room with sloped ceilings and a dormer window. I will post a few pictures in a week or so.

Hey man thanks for the link.

If I'm not mistaken...swiffer uses static electricity as a principal component to attract dust. So wouldn't that be counter intuitive? :( And those little fine fibers of the swiffer can easily get trapped by the wood fibers thus causing finishing issues maybe even fisheyes?

For water-based finishes. I use a good cotton rag and mix equal parts of water and denatured alcohol and soak the rag, ring in out, wash the wood down. It raises the grain and cleans the wood at the same time. The alcohol in the water helps speed the dry of the water on the wood. After mid-coat scuffings, I use a clean cotton rag damp (more dry than damp) with water to remove dust.

I like General Finishes water-based topcoats. :)

Love pictures, look forward to seeing them!!!!!

Between coats the swiffer works great. Anything that uses static electricity to its advantage will work just fine. The dust and the surface area carries a positive charge. Materials like microfiber and polyester carry a negative charge. The dust is attracted to the cloth because opposites attract. A cloth like cotton would just be worthless because it's an almost neutral charge. Dust is positively charged so it's not actually attracted to your new wood surface it's actually just sitting there.

Geez seems this product is reaching out a bit. It's developed for other industries and trying to include auto body/wood finishing. Their own website even suggest to cut back the compressed air pressure, here is the quote "7. Use low pressure during blowoff. High pressure creates high velocities over the body surface which causes static."

So I guess if you use compressed air to blow your surface. Take their advice...and turn down the air pressure...and put the $150.00 back in your pocket. ;)

Back in the days of painting cars you, would hang a chain from the frame of the vehicle to the ground. Thus help to reduce static.

Just remember...most of the time finishing contaminates come from the person (the guy/gal pulling the trigger)

Tried a swiffer, any slight rough edge snagged fibers from the swiffer pad. Microfiber cloth worked great !

Keep in mind every edge snagged on your swiffer will snag on you wife's or clients swifter after delivery. You shouldn't have any snags after your seal coat. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.