Tom Conover Posted June 13, 2012 Report Posted June 13, 2012 I am going through boxes and boxes of "stuff" that we stored in our basement after my parents passed a number of years ago. In one box I found this Craftsman jack plane. It is approx. 14" long and 2 5/8" wide. It has a corrigated sole and other than some light rust on one side of the body, everything looks great. The iron and the chip breaker are only 1/16" thick each and it has a fixed mouth with a 3/16" opening. Is it possible to get a new and thicker iron for this plane and does anyone have any experence with this plane. It is a great looking plane. Thanks, Tom Quote
justinh Posted June 15, 2012 Report Posted June 15, 2012 Yes it is possible to get a blade for this. It looks like a Stanley style plane so one of the blades from hocktools.com should work. They also have the chipbreakers. I haven't ordered anything from them but I've heard that they are great to work with. I've also heard that they are good about answering questions. Good luck. Quote
jhl.verona Posted June 16, 2012 Report Posted June 16, 2012 Looks to be in really excellent condition. I have a Hock in my #4 - lovely blade, and gives a very smooth surface. But before you rush off in that direction, give the blade a sharpen, and the front edge of the chipbreaker, and see what happens. The mouth is huge - good for a scrub, but you'll need to close it up for delicate work, that means moving the frog forward. Once you get some nice shavings from it, know that a modern blade will probably give the best performance boost for your buck (or euro as may be). It looks like your plane is equivalent to a #5 - a Jack, very useful for all sorts of work, and it also looks like your Dad did some fettling on the frog, so you probably won't need to. Show us the shavings, John 1 Quote
Tom Conover Posted June 18, 2012 Author Report Posted June 18, 2012 Thanks for the input.. I have sharpened the blade but did not touch the chip breaker. Will do that and adjust the frog to tighten up the mouth. Will report back... Quote
tomstork Posted July 15, 2012 Report Posted July 15, 2012 Very interested in any followup you may have, and I was amazed to find your posting only a few weeks old -- as luck would have it, I spoke today to my brother, who is going through our father's old stuff, and I asked if I could have Dad's old identical-sounding piece (I was surprised when he gave me the measurements -- exactly the same as yours -- because it's a touch smaller than a Stanley 5 1/2, and I'd have expected Craftsman to copy the Stanley sizes exactly). Since I already have a Stanley 6, though, I'll be happy to have one a little smaller! 1 Quote
aengland Posted July 16, 2012 Report Posted July 16, 2012 I've owned several older Craftsman hand planes. Those with red or blue paint embossed on the label on the lever cap have been excellent users--still have one and it's a favorite. I've used Hock and LV veritas replacement blades. Both are excellent. Mine have wood handles: the better the wood, the better the plane. Plastic indicates a lesser but still possibly quality user. 1 Quote
Tom Conover Posted July 16, 2012 Author Report Posted July 16, 2012 I have not had much time in the last month to work on this plane. Life sure has it's twists and turns! I will try to post some pics of the shavings with just the craftsman iron and chip breaker soon. I was very surprised the it worked so well. I stIll have more tune-up to do and am eager to see how much more improvement I can get. I do have one question of you old pros out there... The angle of the mouth does not match that of the frog. It is my understanding that they should match. If I need to file the mouth, it would be a quite large opening then. I need your imput I have purchased two new irons from Ron Hock (www.hocktools.com) and he is making a new chip breaker for me. His prices are very, very reasonable and he is a very nice gentleman. Congratulations "tomstork" on getting and using your Dad's old plane. I just love the feeling of connection every time I use my Dad's and Grandfather's old tools. I still have 3 more boxes of old tools and hardware to go through when I have enough time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.