-Al Posted June 15, 2012 Report Posted June 15, 2012 Can someone go through the steps needed to "tune" a hand plane? And on a related note, would folks rather buy a used good quality plane and tune it, or a new, cheaper (ie Groz) plane and tune it? -Al Quote
croessler Posted June 15, 2012 Report Posted June 15, 2012 Al, I have a step by step that I go through that I can write up for you... I may not get to it today but hold on and i'll do it. Quote
rmac Posted June 15, 2012 Report Posted June 15, 2012 https://www.google.c...ype=&as_rights= -- Russ Quote
jhl.verona Posted June 16, 2012 Report Posted June 16, 2012 I have been down that You can spend a lot of time on it, and I'm not certain that it's all really worth the effort. Certainly you'll get to know the plane very well, but not necessarily understand when it's really tuned up - you need something to compare with, or someone to show you what 'good' really is. I went along the used plane route, though buying from photographs on Fleabay is a gamble. If you're in North America, then you've got a much better choice - I had to buy from the UK, because there is no market in Italy. Perhaps the best tip I can give is to do the absolute minimum necessary, then try it out. That would mean squaring and sharpening the blade and the face of the chipbreaker that sits on the blade edge. You'll be surprised at the difference this will make (squaring and facing the chipbreaker, the blade should always be sharp). Learn to resharpen the blade - there are several techniques, I like the one that takes the least time. If you can, check out your plane with someone else's - preferably someone experienced. I spent a morning with a friend in Padova, found out I was doing a better job of sharpening, but learned a lot nonetheless. Only go down the frog flattening, sole flattening route if really, really necessary - it's a lot of work. None of the planes I bought had been fettled that way - perhaps they didn't know, or perhaps it's just overkill... John Quote
Tom Conover Posted June 18, 2012 Report Posted June 18, 2012 I'll let you know how it goes when I finish "tuning up" the old Craftsman jack that my Dad had. Sure seems like a number of the plane gurus love the old Stanleys and Miller Falls. I did purchase a used Groz at a flea market and despite 4+ hours of work it still doesn't cut worth a S***!! It does make a great looking paper weight on my desk. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.