MarcoG Posted June 27, 2012 Report Posted June 27, 2012 I know there is a thread (well, there's probably a dozen...) about which planes to buy. But I'd like to have something clarified that I think does not quite fit in that topic. As I've learned, it's better to use a plane at an angle to get better results. This, I've been explained, is because that way, the blade will work at a lower angle relative to the wood. So, says my mind, aren't there planes with low angle blades available? So my question is this: If the lower angle is advantageous, what is their disadvantage? I mean, the 'normal' angle planes are still sold so there must be a use for them as well. Quote
rmac Posted June 27, 2012 Report Posted June 27, 2012 Lower angle = good for end grain. Lower angle = easier to push in well behaved wood. Higher angle = harder to push Higher angle = less tearout in wood with interlocked or swirly grain. -- Russ Quote
Onboard Posted June 27, 2012 Report Posted June 27, 2012 Here’s a short article that goes along with what Russ has already posted. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.