Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Linseed Oil and glueing

Featured Replies

Hi All,

I have been making a jewellry box for my wife and have run into what could be a problem.

I finished certain portions of the box with boiled linseed oil while they were unassembled and I was careful not to apply the finish to the areas that needed to be glued. It appears, howerver, that the oil has soaked through and saturated the wood throughout, even the parts that I taped off.

Will I have to switch glues from the PVA glue I have been using to an epoxy or should I shellac and then finish the glue up?

Any advice on how to correctly proceed would be appreciated.

Chris

I think if it was me I would scuff up the areas that I was concerned about with some sand paper just to give the areas some tooth. Than glue the box up with PVA I think the glue will hold just fine, with epoxy you would have the same problem and have to sand the areas also, squeeze out would be alot harder to deal with than the PVA.

P.S. I geuss I was thinking the BLO was cured if so my advice stands, if not wait for the BLO to cure before proceeding.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.