croessler Posted July 29, 2012 Report Posted July 29, 2012 I am about to pull the trigger on my first cabinet saw and would like to get your input on a very specific question. I am bout to purchase a Saw Stop; now, I know there are haters and lovers out there so let's not get distracted. This is my choice after having lost my right index finger and had massive nerve damage to my right hand while in the military (non- tool related of course). They where able to re-attach the finger and it works just not much feeling in the hand. So, with that out of the way I am considering the following: Saw Stop 3HP Professional w/ 36" fenceSaw Stop 3HP Industrial w/ 36" fence With one of the larger difference being the overall table size do you think that would be a significant factor in a home shop? I am currently using a General 50-185 Contractors saw. I believe the trunion is much heavier on the industrial model as well... --Chris Quote
CessnaPilotBarry Posted July 29, 2012 Report Posted July 29, 2012 How big is your shop? I replaced a 1999 General 650 cabinet saw with a SS ICS. The differences in size only add up to a few inches. Btw... My SS is my fourth table saw, I've used at least 10 others, including all the "favorites", and it is truly a top notch saw. Even if it didn't stop, I would choose it again. The hydraulic base is fantastic, too! Far better than any other mobile base I've used. Quote
knotscott Posted July 30, 2012 Report Posted July 30, 2012 Owners of both models give the SS rave reviews, and both are more than sufficient for even a serious hobbyist. What's the $1k price difference mean to you? IMHO a shop with a PCS and other nice tools is better than a shop with just an ICS.... Quote
Beechwood Chip Posted July 30, 2012 Report Posted July 30, 2012 I bought a table saw that is really too big for my shop. I'd say that you won't regret the money spent on a larger saw, but you will regret buying a saw that's too big for your space. Spend a lot of time doing shop layouts, and remember to leave space between tools for infeed, outfeed, moving lumber around, etc. Quote
CessnaPilotBarry Posted July 30, 2012 Report Posted July 30, 2012 Scott raises an excellent point... I'm a long time hobbyist, at the time I bought my ICS, I was essentially fully tooled. I had a major contribution towards my new saw in proceeds from the sale of a really nice "old" saw. If I were not, with other major purchases on the horizon, I most certainly would have chosen the PCS. Quote
croessler Posted July 30, 2012 Author Report Posted July 30, 2012 Good points... My shop is pretty much fully tooled, so to speak. the family two car garage is my shop. The only time I share it is when the Hurricanes or tropical storms come along. That's why everything in my shop is on a mobile base. From a size perspective that is the reason I am looking at a shorter fence as I normally break down sheet goods before getting to the table saw so a 52" fence would be massive overkill not to mention get in the way. I'm leaning toward the the PCS instead of the ICS and save the extra 1k toward other items later on.... Thanks for being a sounding board guy's! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.