Knock On Wood Posted August 21, 2012 Report Posted August 21, 2012 I am about to pull the trigger and get a Kapex for the shop. Part of this purchase will involve creating a new Miter station. I have an old Dewalt 300mm Powershop RAS that I have never set up. I had planned on incorporating this into the Miter station like Norm's Miter station but it won't cover a 24 inch cut for cross cutting base cabinet ply. The question I have is, is it worth it? Should just sell the RAS and then buy a track saw to handle large Cross cuts. Or is the RAS still a good toll to have around. Quote
fransikaner Posted August 22, 2012 Report Posted August 22, 2012 Welcome to the forum! I wouldn't be so bold as to give you advice on keeping the RAS, but I will tell you that a track saw gives you much more versatility in use and most of the precision cutting offered by the RAS will be accomplished by the KAPEX. Quote
Knock On Wood Posted August 22, 2012 Author Report Posted August 22, 2012 That's what I have been thinking. There are so many other (more compact) ways to do what the RAS does. Hopefully I can get enough for the RAS to get the Dust Deputy Add on for the Festool dust collector. Quote
Pbmaster11 Posted August 24, 2012 Report Posted August 24, 2012 I have a small shop and bought a festool 55. great for breaking down sheet goods and strange cross cuts! Quote
tim0625 Posted August 30, 2012 Report Posted August 30, 2012 Welcome KOW! Good people here.....lots of experience, lots of knowledge. Ask yourself this question...and think about it a few minutes....why haven't you set up the RAS? Is it the work you do doesn't really require it's capabilities? No room? "I'll get to it one day?" Again, to that statement...why haven't you? See, I have a RAS too....in the corner....hardly used...given to me...I keep thinking I'll incorporate it into a chop saw station. I don't do a lot of what it's good for but IF I WANTED TO I COULD USE IT FOR WIDE CUTOFFS AND DADOS AND LAP JOINTS AND AND AND...but thus far, I haven't and I've gotten along pretty good. It kind of boils down to the fact I probably don't really need it BUT AS SOON AS I GET RID OF IT.....you know the rest...so for your situation, consider money, footprint, time and cost to build the station but know this....on this site, some people use the RAS and swear BY it - convenient, practical, versatile, cheers and confetti!!!....and some have gotten rid of theirs because they swore AT it - dangerous, not versatile enough, attracts aliens!!!....it's like spinach....love it or hate it - so ask your self the 'why' questions and you will know your answer. I am TimWood and I approved this message. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.