bglenden Posted September 2, 2012 Report Posted September 2, 2012 I just got a new Grizzly 17" bandasw. The wheels are out of coplanar by about 1/16" near the rim, is this enough to worry about? (I have already adjusted the shimming along the shaft so the center of rotation is the same, now I would have to shim one edge of one wheel to get them parallel rim to rim). Cheers, Brian Quote
lclocke Posted September 3, 2012 Report Posted September 3, 2012 Hey Brian, my understaning (which I don't know much on bandsaws) is the wheels don't necessarily have to be coplane. If it is tracking properly and you have 1/8" movement side to side then you should be set. Marc Spagnulo has a bandsaw setup video that helped me from the iphone app. I'm in the process of rebuilding a 15" Grizzly I got from a yard sale and I have a few questions myself, mainly on what type of guide system to put in there. Any time you see a review on them it's typically someone biased to a certain brand or design havent really found pros and cons for each one. Well good luck, hope this helps and keep us posted on what you did to get it tuned properly. Larry Quote
STL Woodguy Posted September 3, 2012 Report Posted September 3, 2012 I "think" it was in this Bandsaw clinic video where it's mentioned that wheels not being coplaner shouldn't be too big of a concern as sometimes the factory has set it that way for a reason. EDIT: Yep, hit 6:00 for the details. 1 Quote
pagel Posted September 3, 2012 Report Posted September 3, 2012 The Alex Snodgrass video that Ends of the World posted is spot on. My new MiniMax bandsaw came from the factory just as Snodgrass described and it tracks perfectly. I wouldn't touch it unless a problem arises. Quote
lclocke Posted September 3, 2012 Report Posted September 3, 2012 Ends of the world that is indeed the video i was thinking of thanks for clarity Quote
bglenden Posted September 4, 2012 Author Report Posted September 4, 2012 Many thanks for the advice - I'll ignore it unless/until it seems to be implicated in a cutting issue. And I'll carefully watch the above video. Cheers, Brian Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.