TRBaker Posted September 21, 2012 Report Posted September 21, 2012 I have an older model Delta Contractors' Saw and I started having problems with the material wanting to wander away from the face of my fence. I checked and the blade is no longer square to my miter grooves. I loosened the four bolts that hold the top and pivoted it enough to get the blade and grooves parallel again. Within a week it's back doing it again. What can I do short of welding to keep it from moving? Quote
Andrew Pritchard Posted September 21, 2012 Report Posted September 21, 2012 Does the four bolts have crimped washers that try to hold onto the table top? If they do, have you tried replacing them to see if the bolts will grip the table better? Quote
TRBaker Posted September 21, 2012 Author Report Posted September 21, 2012 good idea, Andrew. I'll try that. Start simple . Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.