Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

what went wrong

Featured Replies

I'm in the process of finishing an entertainment center which i stained with general finishes dark

brown water based dye. the finish is oil based poly that i am wiping on. I noticed that as I was applying the poly the rag I was using was becoming brown. after several coats I could see that some spots were considerably lighter than when I started. Could someone explain what happened.I'm guessing I should have put a coat of shellac before I started putting on the poly, but I have used the same stain on another project with no problems

What species of wood is it and how long did you allow the stain to dry?

I bet you had put on coats of dye that did not soak in. If you do not wipe off the excess on the surface and it dries on the surface then it will loosen when rubbed or wiped. Even if you spray it can soak into the first coat and be sanded thru easily between coats.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.