Recommended Posts

Posted

My only thought is that I machine plane to stops, at the same time, or to match other stock to a "finger rub" match.

I like Wixey stuff, but I've never seen the need to thickness plane to digital standards. Most parts are done when the machine hits a stop.

Posted

My delta 22-580 depth stop is lousy. Your supposed to be able to turn the depth stop knob and lock it into

place but once you lock it, the cutterhead will still move down past the setting so I cant make repeatable planes. Ive read

this same thread over at lumberjocks and there are 3 or 4 people with the same problem. The wixey

will correct this problem and give me better control.

Posted

I have a Wixey on my Bridgewood planer and highly recommend it. It comes in very handy if you don't plane every part of a project at the same time. Which is often in my case and the repeatability is indispensable.

post-206-0-46764500-1349447341_thumb.jpg

Posted

I also have one on my Grizzly planer and love it. On my previous Dewalt planer I had the stops and was concerned about not having them, I figured that I would take the stops off and convert them to work, wouldn't be hard but after having the Wixey I see no reason to. Perfect repeatability on any thickness everytime.

Posted

I have the saw blade angle gauge, the height gauge, and the digital readout for my Dewalt 735. It's not really that I need things measured to thousandths of inches, it's just easy to see-say I need this board to to be 1/16 thinner, I can take it in roughly two 30 thousandths passes....I guess it's just easy to see the math and crank the wheel. But on the final pass, it's neat to know that each board is exactly the same thickness without having to plane and measure and then again and again. On the height gauge, again, easy to raise the TS blade or router bit to the height and cut. Sometimes you want a kerf X amount deep....I keep a 6" stainless ruler in my apron all the time but the older eyes see the digital numbers a little easier. I will say this...when I installed my readout on the planer, it lasted about a month and just went crazy. Some parts of the numbers didn't show anymore. I emailed Wixey with a couple pictures and an Amazon receipt, "Barry Wixey" emailed me within a couple hours and promptly sent a new digital box.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined