Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

scrapwood coffe table

Featured Replies

Hello everyone !

as my 1st project i want to submit to criticism, this is a scrapwood table i made in school, in between 2 projects.

i always hated when i passed a trash bin and saw small, but beautiful pieces of hardwood in there. Wood is a living material and i feel really guilty of wasting it.

for like 6 months, every time i saw a piece, i took it out of the trash, and piled it up under my bench at school.

the teachers often said to me "clear that, you'll never use that" but i had something in mind.

so, when i had some free time, i decided to go for it. i took all the small pieces and jointed and planed them and cut them straight at the ends.

i planed to 3 thickness. 15, 30 and 45mm so i could inter change pieces to make different patterns, but so they would always end up fitting.

that was a LOT of work. row by row, i glued the pieces to make the top and the legs.

post-7625-0-18162000-1350832126_thumb.jp

post-7625-0-47447600-1350832484_thumb.jp

then, i opted for 'through tennons?" sorry im french canadian! That step i HATED. i did them by hand and it was a pain! 2 inch hardwood mortize x4. even though i pre-drilled the contours, it still was very long. if i did it again, ill try the router with some jig for better/quicker results.

post-7625-0-05572100-1350832295_thumb.jp

i made a notch to the tennons on the bandsaw so i could put a piece of wood later on to fix the tenons in place.

post-7625-0-91936200-1350832469_thumb.jp

sanded everything and sprayed 3-4 coats of Pour-N-Wipe "normally" wipe-on finish and the result was very pleasing.

so if you have a hard time throwing scrap wood away, here is a project you could do with them !

the look is very modern and i think it fits well. Any tips, comments, advices for me ? i'm still leanring every day !

post-7625-0-44795300-1350832607_thumb.jp post-7625-0-53502000-1350832942_thumb.jp

Your table looks good, I wish my first efforts turned out that well. I like the look of the top with contrasting tenons.

Gluing up scraps is indeed a fantastically labor-intensive process. So much the better then, that you were able to produce such a dynamic and energetic piece. Angling the legs gives it even more tension, making for a very bold work, bordering even on loud.

Fit and finish look fine, so any critiques are going to run into the realm of personal taste. Even in the wild and rectilinear palette that you've created, I find myself wishing for something organic. Is there any way it could have had some curves? Perhaps a broad sweep at the ends and maybe coopering the legs (they are glue-ups, after all) to get them slightly convex.

med_gallery_211_737_66195.jpg

But, again, this is all just matters of taste and what other directions you might have gone. Beautiful job all around.

  • Author

that would have been nice indeed. Everything i do so far is "for the 1st time" as i am still learning in school. I just learned this week how to put a jig in the planer to plane planks with an angle on them (could also be done on the jointer, but planer gives more reproducible results)

i could have done that for the legs. but the glue up would have been a little harder i suppose. i'll think about ways i could have done it. maybe there is an easy way i'm not thinking of ! but gluing pieces with an angle would make them slide. bah i'll think about it ! that'S how i learn ! Or would you simply had glued thicker legs, then make the cove in them ? hmm probably not !

anyway, this forum is amazing (because of the amazing ppls!). i've been browsing it all day long.

Guillaume

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.