Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The best Router for the job

Featured Replies

Good afternoon all

My question will follow after this short intro. I was given a set of cabinet door bits with 1/2 shanks, because I am attemting to build my own custom Kitchen Cabinets. So here is the question, if I buy a 3.25 hp fixed base router, will it be powerful enough for my cabinet project but not to powerful to use to cut dovetails for the drawers? :)

You have plenty of power. I prefer using plunge routers, probably that is because I only have one fixed base router that I used for a specific application.

==> cabinet door bits with 1/2 shanks, because I am attemting to build my own custom Kitchen Cabinets.

best router for an entire set of kitchen cabinets (assuming raised panels) the job is a router table, lift and PC 7519

3.25hp (aka 15 amp) is the most you can get, and should be plenty.....good choice IMO. "Best" router is subjective, but the MW5625 and PC7518 are the perennial top dogs in many comparison tests. Both are stout and well proven, the MW has topside height adjustment that the PC doesn't have. There are also some excellent 15 amp routers from Hitachi, Makita, Bosch, DW, Triton, Freud, etc. The Triton and Freud have the most top side conveniences, and are worth some consideration IMO. The Hitachi is often one of the better bargains.

==> topside height adjustment that the PC doesn't have.

I leave that to the lift.

The reason I recommend the PC is that most lifts are out of the box set for that router. The 9 is a better choice then the 8 due to the speed control. the MW is also a good choice.

==> topside height adjustment that the PC doesn't have.

I leave that to the lift.

... The 9 is a better choice then the 8 due to the speed control.

The PC 7518 has five speeds (10,000 / 13,000 / 16,000 / 19,000 / 21,000).

The PC 7519 is the same router with only one speed (21,000).

I've had the PC 7518 in a Bench Dog ProLift for several years. It's great combination, they fit together so well you would think they were made by the same company.

Sorry, you are correct -- i got my numbers reversed. I've got (2) of the 8s and love them. One is on my woodpecker PLC lift (which I also recommend) and the other is there for monster hand-held jobs...

7518 in a Rout-R-Lift II for the last year or so. Top notch service so far. I've heard of people having issues with the speed control going out on those units, but mine has been fine. The 7518 would chew through concrete if you asked it to.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.