Barbancourt Posted October 29, 2012 Report Posted October 29, 2012 I've been thinking about getting a band saw for awhile now. Highland and Woodcraft have some nice deals on Rikons right now, and I may finally pull the trigger. I had been planning on a 14" model, but there's only a $200 difference between it and the 18 incher. Other than the larger throat, is there enough of a difference between the two to make the upgrade worthwhile? I'm primarily a hand tool guy, but I'd like to be able to resaw and make long rips/curves. While I'm asking questions, does anyone have any experience moving either of these units? Can you use an appliance dolly once they're off the truck? I've got a basement shop and will have to move it through some 28" doors on the way. Thanks for any advice. Quote
mikem Posted October 29, 2012 Report Posted October 29, 2012 I will say what i would say for any other tool purchase. Get the best machine you can afford. One thing I would check is the power requirements of the bigger saw, and make sure you have the ability to provide that power. While not as big as the Rikon 14", I have a 14" Grizzly bandsaw, and really like it. Quote
Hybrid-woodworker Posted October 29, 2012 Report Posted October 29, 2012 Check the specks, I am guessing that the larger saw has a larger motor and as Mikesaid, make sure you have the power for it. BRuce Quote
joelav Posted October 29, 2012 Report Posted October 29, 2012 The Rikon 18" is more powerful, but he 14" deluxe actually as an inch more resaw capacity than the 18" does. Quote
Barbancourt Posted October 29, 2012 Author Report Posted October 29, 2012 Thanks all. The power isn't an issue -- I would wire the 14" for 220V also. I guess my big question is how often do people with a 14" saw (and less powerful motor) run into situations where the saw can't do the job at hand? Quote
STL Woodguy Posted October 29, 2012 Report Posted October 29, 2012 While I'm asking questions, does anyone have any experience moving either of these units? Can you use an appliance dolly once they're off the truck? I've got a basement shop and will have to move it through some 28" doors on the way. Thanks for any advice. Heh heh heh, oh yeah. I don't have help available at beck and call, so I've had to move some of my equipment into the basement in creative (and stupid) ways. I bought the 14" Rikon and getting it off the truck, onto my dolly and inside my place was no issue whatsoever. What WAS an issue was getting it down the steps. One advantage in my favor was that my steps are carpeted (friction) and have rounded off corners, so what I did was keep it in the box (but removed the cast iron table), get behind it on the top of the stairs and walk it down lying flat across the stairs as the box glided on the steps. It really wasn't bad. Not that I suggest doing that of course, especially if you have help available, but just saying it really isn't that bad to move. Doors no problem for the 14," don't know about the 18". I would think that if anything was to be a problem getting through the door, it'd be the table which you can leave off until it gets to it's final destination. Quote
Eric. Posted October 29, 2012 Report Posted October 29, 2012 Geez, you guys in basements without walkouts...man, I feel for ya. What a PITA. Quote
Hybrid-woodworker Posted October 30, 2012 Report Posted October 30, 2012 I have the 14" jet and never had a problem with power. I mould not want to resaw 10" - 50 Year old oak with it but it has cut everything I have ever needed. BRuce Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.