Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Thirsty wood...how can you deal with it?

Featured Replies

My project is almost finished and I was thinking about how much finish I used. I was making a nice 8" bowl, about 6" tall out of some slightly green birch. To me, birch is a lightweight wood and very porous. Actually, let me take a step back...I am on bowl #2 of said birch. The first was about 12" long and 6" wide. Both were turned with the grain parallel to the bed.

On the first vessel, I dyed the wood and put on a coat of Formby's tung oil finish and then multiple coats of Arm-R-Seal. In a few coats, I was close to the finish I was looking for.

On the second one, I forgot to put on the Formby's and went straight to the Arm-R-Seal. The result is about 14 coats later (and allowing about 24 hours to cure between each coat), I still have not gotten parts of the bowl to "seal" so that I am building a finish on the bowl. The finish is still being absorbed. I've almost gone through an entire pint of Arm-R-Seal on this little guy.

Again, the only difference has been that I didn't add the Formby's (and this one is wider). I have a hard time believing that a penetrating oil can block up the pores but something like Arm-R-Seal just keeps getting absorbed. (FYI...my first couple of coats I really flood the surface and let it sit for a bit before wiping the excess. The next layers are applied with a sponge brush and if I was too generous with the application, I'll wipe...but mostly just apply so that the surface looks wet)

I feel like I am completely misunderstanding something. Could someone shed some light on what is going on or what I am doing wrong?

  • Author

Arm-R-Seal is an oil based varnish. It builds a film...if it would ever build on the surface! LOL! That is why I am perplexed. It should have hardened and blocked the wood from absorbing any more.

Are you using it the Armrseal full strength? I would take the bowl off the lathe and drown the bowl in Arm-R-Seal. Every hour or so keep wiping another coat of oil, do this for a day or two. Eventually the wood will stop taking oil and build a finish then, let it dry. Return the bowl to the lathe to finish the "finishing" process.

-Ace-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.