Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to build a heavy duty cabinet/countertop?

Featured Replies

As the title says, I need advice on building a cabinet that will take the weight and torque from having my Delta midi lathe mounted to the top. I'm a neophyte at cabinetry, so while I want to make it strong enough, I don't want to overbuild it either.

I was thinking along the lines of making it 24" deep by 4' long by 36" high. I'd make two of them and throw an 8' Ikea birch ply countertop for the top, spanning both cabinets. Will a standard plywood case made with 3/4" ply with rabbets at the joints be strong enough, or would I be better off making a solid frame with ply panels instead? If so, panels inset or overlaid on the frame? Nix the solid top and go with a torsion box instead?

The cabinet area below the countertop is envisioned as being split into several full length cavities that are drilled for shelf pins so I can mount drawer slides at whatever height I want, and be able to change it up later.

Any thoughts?

A plywood box for the cabinet should be fine, I would use 3/4 ply for the box parts includeing the back if your worried about vibration I would lag bolt the box into the wall studs for a beefier conection. I would build in mounting strips for the counter top securely attached to the top of the box so you can have plenty of area to screw the top down on the front, back, and sides of the box. The backof the cabinet, and countertop are the two keys to makeing the cabinet rigid enough for your cabinet not to rack when your useing your lathe. Yes all the parts of the box should have dados and rebates glued and screwed whenever you can.

  • Author

Thanks. One minor change, after going to the shop with a tape measure I realized that a 36" countertop would put the head of the lathe at 50-1/2", a little too high. My current stand is 30" with casters, which puts the head at 45". Since this is the height of my elbow this should be ideal. So the new countertop height would be 30".

  • 4 weeks later...

What I have used for my workbench and may work in your situation is an old commercial solid core door, like the ones you see in hospitals and office buildings. Keep a look out for them on craigslist or similar classifieds. they're sturdy and can be found for cheap.

Justin Beattie

  • Author

I've thought along those lines too, still settling out dimensions so I only build these once.

+1 on the solid core door idea

I would add a face frame to keep the case square under the weight and stresses of the lathe being used on top. You might want a toe kick for foot clearance. You could build it to hold some sand bags for additional ballast.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.