lemonjello Posted November 28, 2012 Report Share Posted November 28, 2012 I don't know where this was discussed, but I was thinking about this joint and think a dry large mortise and tenon and a "bench bolt" type connection in where the nut would be buried in the foot board lamination and bolt or bolts housed in dado, then a strip glued in to hold bolt in place on underside or rail. Or my other thought is to use a pair of handrail bolt connectors called a "Zip Bolt" with the dry fit tenon with the bolt part in foot board and "Zip" part in the side rail. What do you all think? Quote Link to comment Share on other sites More sharing options...
thewoodwhisperer Posted November 28, 2012 Report Share Posted November 28, 2012 That's actually quite similar to what I am going to do. The video is out now so check it out on the Guild site. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.