Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cannot decide here on my new set of chisels..what is your logic?

Featured Replies

Well I have used and abused my first set of chisels and would like to get a nicer set and relegate my Lee Valley basic bench set to the "beater" status and cannot decide whether to get the Veritas bench set in the new PM-v11 metal as it looks pretty impressive or go with Marks pick in the Fujihiro. The stats on the PM-V11 metal are impressive to say the least but I also have read about the amazing higher end japanese steel. I have heard some say that the Japanese steel can be a bit brittle though I do think some of that might be people misusing them, some of it truth and some of it overstated so I am not too concerned about it. My primary concern is the transition between two different styles of chisels in angle length etc. I see so many suggest to have a few of each but is that at a detriment to consistent technique or rather a benefit because each will have their strengths. So for those of you who own or have used both do you seem to stick to just one style because you prefer it more or do you seem to go back and forth for different purposes and is there anything else you would add to my thinking/decision making. What would you do?

If I were upgrading chisels right now, I'd have a hard time not going with the PM-v11. The thought of less sharpening is VERY appealing to me. I sharpen enough with every plane I send out the door.

That said, I so badly want to try some sweet Japanese chisels also.

So yeah, I'm no help. HAHA

Hi Tdog - that sounds like a choice that has a great outcome no matter what your selection - in other words, that's a good problem to have :)

There's a chisel review in the latest issue of Wood, and the Veritas PM-v11 earned "Top Tool". At $360 for the set, it's pricey- but apparently you get what you pay for. As for the Japanese chisels....it's too bad you do don't have someone in the area with a set that you can try out, to get a feel for the issues you mention ("angle length etc").

Over the last few weeks, I've had the chance to play with some PVM-11 chisels sent as samples to a local school. They are OUTSTANDING tools...

If I didn't have 3 sets of bench chisels already, I'd buy them in a heartbeat. The form factor felt great in my hand, so I'd even put the O1 version right up there with the best if I absolutely couldn't afford PVM-11. I've also liked LN, Blue Spruce, and the new Stanley socket chisels. The Stanley's required a decent amount of work on the backs and sides before they were truly ready for prime time.

One thing to be aware of, something that I believe Veritas states in the package documentation, the backs come FLAT from the factory! Don't mess with them. Over the last several years, Veritas has been using a special machine to lap iron and blade backs flat at the factory. The back is not polished, it is finely ground extremely flat. There is no need for it to be more shiny, and polishing will probably make it less flat. Leave it alone... ;^)

I've had Irwin Blue handles and Stanley Fax Max chisels, and they sharpen well; but, both had edge crumble failure and don't hold an edge very long. I chopped four dovetails with LN and the blade showed no signs of crumbled edge vs. the Stanley that crumbled by half of the first one. YMMV

  • Author

Thanks for the heads up Cesna...I spent almost an hour a piece flattening the backs on my lee valley yellow handle and would love to avoid that headache again. After reading through many reviews I guess they are known for that. When I was checking out the Blue Spruce online they are out of stock indefinitely right now until they deal with their "supply" issue. They were top of the list for me until I read through the lab results regarding the wear resistance and ease of sharpening on the Veritas. I don't totally dread sharpening and that is just part of the deal but between my wives japanese kitchen knives, hunting knives, daily knives, bushcraft knives, planes, chisels, axes..you get my drift.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.