Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Plasma TV Lift

Featured Replies

This is not a fine woodworking project ... just a box.

WHY ...

I can't stand seeing the plasma on the wall. Artwork belongs on the wall.

To accomplish this I am building a cabinet box where the plasma is going to reside, then ... open sesamo ... the TV lifts, we watch a movie with my bride and ... close sesamo ... the TV goes back down.

Fine ... no problem.

CRITICAL PATH.

The center speaker. I wired my TV viewing area with surround 7.1 type stuff so the audio fans say the center (or centre if you are on the other side of the pond) speaker should be right in front where we get the pop effect.

Doing this will make my cabinet 24" deep (about 660mm). This is stupid.

OPTION 1.

Install the Center channel speaker at the lowest part of the cabinet.

OPTION 2.

Install the center channel speaker just under the crown molding.

I prefer OPTION 1 because if I move the TV to watch the world cup the center channel moves with the TV.

Ideas?

Bobby, Just as long as the speaker is inline with the vertical axis centre of the television your brain will accommodate you after the first movie.

  • Author

Thank you. I like your answer :)

Also I think that I will tilt the speaker a little bit upwards so we have a more directional sound.

Bobby, Just as long as the speaker is inline with the vertical axis centre of the television your brain will accommodate you after the first movie.

let me know what you're looking at by way of lift hardware. I've got a "gamer bed" I'm working on that needs this kind of stuff.

  • Author

I bought three years ago hardware from Accuride which is called CBLift-050.

http://www.accuride.com/Resources/PDF/Quick%20lift%20tech%20sheet-R3-1109.pdf

The components will be stored in another cabinet where I am using this hardware

let me know what you're looking at by way of lift hardware. I've got a "gamer bed" I'm working on that needs this kind of stuff.

Thank you! (of course, dimensions require a redesign, but I can live with that.) THANK YOU THANKYOU THANKYOU!

(Can you tell I'm excited?)

  • Author

I am happy to be of service. That is how this amazing forum works. We all pitch in one way or the other.

Happy New Year and let me know if I can help you more.

Thank you! (of course, dimensions require a redesign, but I can live with that.) THANK YOU THANKYOU THANKYOU!

(Can you tell I'm excited?)

  • 3 weeks later...

let me know what you're looking at by way of lift hardware. I've got a "gamer bed" I'm working on that needs this kind of stuff.

I had been thinking about this lately and if non-electric lift hardware isn't available then it should be possible to make custom hardware using springs/pulleys to lift.

  • Author

You may be right. I am too lazy to do that.

I had been thinking about this lately and if non-electric lift hardware isn't available then it should be possible to make custom hardware using springs/pulleys to lift.

I had been thinking about this lately and if non-electric lift hardware isn't available then it should be possible to make custom hardware using springs/pulleys to lift.

  • Author

After a pre-assembly done with Dominos, I realized the bottom of the TV was going to be at 48" high so I had to compromise and use a smaller center chanel/speaker. This will allow me to cut the bottom partition and have the Plasma bottom at about 36 to 38".

Not a bad experiment for my first time around.

Today I am getting wood for the face frame and I will try to match and sequence the pieces as much as possible.

The great thing about Bohnhoff Lumber is that I can go through the lumber rack and pull out the pieces as needed. I am going armed with chalk and my Festool Jig saw to cut pieces so they fit in my small FJ Cruiser. My big van is occupied by furniture my lovely wife picked up for Colorado so the van is completely out of commission.

More to come.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.